Industrial Coffee Table Using Pipes

If somebody asked me to specify When we furnished Sadler Home, the style I had in mind

Industrial Coffee Table - Sadler HouseWe desired the house to be comfortable, yes. Many of all, we wanted it to feel fresh and light.

We likewise had a tight spending plan.

Have you ever gone shopping for a coffee table? After building the farmhouse table for the dining room, I importuned Dan to take on the coffee table.

While scrolling through the hundreds of tutorials on Pinterest, I encountered a photo of a table somebody made utilizing wood and pipes parts. That was it. I liked the durable and extra style.

All the products we used for this table were found at our local home enhancement store. You might do this truly inexpensively utilizing pine if you wanted to. We spent lavishly a little and opted for poplar, considering that it is more resilient and has a cleaner take care of being stained.

All-told, buying the products for the table cost us about $125 … although I should confess I have long-since lost the receipt (oops). Suffice to state, we got a beautiful new table for much less than we would have paid in a shop.

Products:

4 1/6 boards that are 4 ” long (these are standard in your home stores).

Keep in mind: all pipeline is 3/4 “.

4 8 ” nipples.

Four 6 ” nipples.

Six Tees.

Four 4 ” nipples.

One 36 ” length of pipe.

Four flanges.

4 end caps.

Sixteen 3/4 ” # 10 wood screws.

About sixteen pocket hole screws.

Spot (if wanted) plus rags to utilize.

Shellac or poly (we utilized Bullseye) and a brush.

Devices:.

Pocket hole jig (such as a Kreg).

Drill.

Recommended: Face clamp.

To Develop the Top:.

Industrial Coffee Table Pocket Holes - Sadler House

Using the pocket hole jig, drill holes according to the jig manufacturer instructions. They must look like this:.

Industrial Coffee Table Clamp - Sadler House

Screw the boards together utilizing jig holes.

Put the table top up on sawhorses or a worktable and sand it well.

Industrial Coffee Table Stain - Sadler House

If you are staining your table, this is a great time to do it. This is a great stopping point for a break. You must wait a couple of hours (per manufacturer guidelines) for your stain to dry prior to using your poly or shellac.

Apply poly. Your top is done!

To Construct the Base:.

  1. Make the legs initially. Set out your plumbing pieces as envisioned. Each leg will have, in this order:.Industrial Coffee Table Legs - Sadler Houseend ca.
  2. p.
  3. 4 ” nipple.
  4. tee.
  5. 8 ” nipple.

flange.

Screw them all together. Simply make sure all the legs are the very same length when you are done (it’s simple to over- or under-tighten and end up uneven).

  1. Then you should construct your two cross-members, in this order:.
  2. 6 ” nipple.
  3. tee.

6 ” nipple.

Next it is time to put the whole base together.

Industrial Coffee Table Assembly - Sadler House

Set out your four legs, your two cross-members, and your 36 ” length of pipeline as pictured:.

It’s most convenient to put the cross-members on the long pipeline initially. Then connect the legs.

Your base is done.

As your last step, turn your table-top over on the workbench so that the underside is dealing with up (ours is unstained in the images, but yours will be stained currently). Center your pipeline base upon the underside of the table. Utilize the 3/4 ” wood screws to connect the flanges to the table. You are now the happy owner of a new commercial coffee table! Check out our if you need some affordable side tables. tray table hack.

Article source: http://sadlerhouse.net/industrial-coffee-table/